3.9.15
Peak Table
Description
►
The Peak Table function will display all peaks (up to 10) that meet the peak
configuration settings. The amplitude and frequency for each peak is listed.
Operation
►
Press
Press Peak Sort[F2] and set the sorting type:
Freq: Sort by frequency in ascending order
Amp: Sort by amplitude in ascending order.
Press Peak Table[F1] to turn the peak table on.
The display splits in two. The bottom screen shows the peak table with
the peak marker ID, X-axis position and amplitude.
NOTE:
77
> More[F7] > Peak Table[F5].
Figure 59.
Note all that the markers for the Peak Table function are all
marked with "P" and are colored purple so they can be
distinguished from the other markers.
February 2017