Example
►
NOTE:
3.4
Autoset
The Autoset function searches the peak signals in two stages (full span & 0 Hz –
100 MHz limited span), picks the signal peak with the maximum amplitude, and
then shows it in the display.
3.4.1
Using Autoset
Operation
►
Press
Autoset Range
►
Amplitude: -80 dBm ~ +20 dBm
Span: 0 Hz ~ 3 GHz
39
Figure 35.
When the pre-amplifier is on, the attenuator becomes fixed at
0 dB (i.e. Attenuation = 0 dB).
> Autoset[F1].
February 2017