Table of Contents
Advertisement
NOTE:
6.1.4
Configure RS232C
Background
►
The RS232C interface is used for remote control with a PC.
RS232C Configuration settings
►
Baud Rate, Stop bit: 1 (fixed), Parity: none (fixed), Data bit: 8 (fixed).
Connection
►
Connect an RS232C cable from the PC to the rear
panel RS232 port.
Press
set the baud rate.
300
4800
57600
6.1.5
RS232C Remote Control Function Check
Functionality check
►
Invoke a terminal application such as Realterm.
To check the COM port No, see the Device Manager in the PC. For WinXP;
Control panel System Hardware tab.
Run this query command via the terminal after the instrument has been
configured for RS232 remote control.
*idn?
This should return the Manufacturer, Model number, Serial number, and
Firmware version in the following format.
*PROMAX,AE-166 AES01,XXXXXXXX,V3.X.X.X
Manufacturer: PROMAX
Model number: AE-166 AES01
Serial number: XXXXXXXX
Firmware version: V3.X.X.X
169
Each time the LAN is reset, the default password is restored.
Default password: lxiWNpwd
> More[F7] > RmtInterface Config[F1] > RS232 BaudRate[F4] to
600
9600
115200
1200
19200
2400
38400
February 2017
Advertisement
Table of Contents
