Press Delete Step[F5] > to delete the step.
The selected step will b removed from the Sequence editor.
Stop Editing
►
Press Stop Edit[F6].
The
Save Current Sequence
►
After a sequence has been edited (and stopped) it can be saved.
Press
The selected sequence will be saved.
Delete Current Sequence
►
Press
4.3.2
Running a Sequence
Run Mode
►
Press
Press Run Mode[F6] and toggle the run mode:
Single: Runs the sequence once only.
Cont.
Sequence[F7] is pressed (Note: the Stop Running Sequence[F7]
option only appears when the sequence is running).
Run Sequence
►
Press Run Now[F7] to start running the selected sequence.
Press Stop Running Sequence[F7] to stop the sequence.
In single mode the sequence will stop running when all steps have
finished.
143
Figure 115.
icon turns off.
> Save Sequence[F4] > to save the sequence.
> Delete Sequence [F5] > to delete the current sequence.
> Sequence[F1] and choose a sequence.
Runs
the
sequence
continually
until
Stop
Running
February 2017