Table of Contents
Advertisement
In the example below, marker 1 is set to Trace1 and marker 2 is set to
Trace2.
3.9.10
Show Markers in Table
Description
►
The AE-166/167 has a Marker Table function to show all the active
markers and measurements at once.
Operation
►
Press
on.
The display will split into two screens. The bottom half will show the
Marker Table with the marker ID (normal, reference or delta), trace, x-
axis position (frequency/time) and the amplitude of the marker.
February 2017
Figure 53.
> More[F7] > Marker Table[F2] and turn the marker table
72
Advertisement
Table of Contents
