4.5
Power Meter
When using the optional power meter, the AE-16X can measure and log the
average signal power level of a DUT from -32 dBm ~ +20 dBm over an operating
frequency range of 1 MHz to 6.2 GHz.
Activating Power Meter Mode
Data Logging Power Meter Measurements
4.5.1
Activating Power Meter Mode
Connection
►
Connect the power sensor to the front panel USB A port on the
AE-166/167.
Connect the RF source to the power meter.
Operation
►
Press
meter on.
NOTE:
147
Figure 118.
> Power Meter[F2] > Power Meter[F1] and toggle the power
The power meter option will not be available if the power
meter is not connected properly.
February 2017