Scale Type; View Scale - Promax AE-166 User Manual

3.3.5

Scale Type

Description
►
Sets the vertical scale in linear or logarithmic units.
By default the linear scale is set to volts and the logarithmic scale is set to
dBm.
Operation
►
Press
Lin.
NOTE:
3.3.6

View Scale

Description
►
The Scale function turns the vertical scale on/off. The value of each graticule
division is displayed with the same units that are used for the Ref Level
settings.
Operation
►
Press
Press Scale Pos.[F6] to toggle the position of the scale when on.
Scale position: Left, Center, Right
Display
►
February 2017
> More[F7] > Scale Type[F2] and set the vertical scale to Log or
If the unit scale is changed (i.e. dBm  volts), the displayed
vertical scale type will remain in the set linear or logarithmic
setting.
> Scale[F5] to toggle the Scale on or off.
Figure 27. The vertical scale is displayed
on the left-hand side by default.
30