Am Analysis - Promax AE-166 User Manual

NOTE:
4.1.4

AM Analysis

Description
►
When amplitude modulation is turned on, the input signal is centered on the
center frequency and the span is automatically set to zero-span.
Measurement items
►

AM Depth: Current, Min, Cent, Max

Mod. Rate: Current, Min, Cent, Max

Carrier Pwr: Current, Min, Cent, Max

Carrier Freq Offset: Current, Min, Cent, Max

SINAD: Current, Min, Cent, Max
Operation: configuration
►
Set the center frequency to the carrier frequency).
Press
AM analysis on.

Any other measurement mode will automatically be disabled.
The display splits into two screens. The top shows the AM waveform in the
time domain. The bottom screen shows the AM measurement.
95
The channel space (CH SPC) parameter determines where
the next main channel is located.
The CH SPC parameters from the ACPR and OCBW setups
are independent.
> Demod[F2] > AM Analysis[F1] > AM Analysis[F1] and turn
Figure 74.
February 2017