Table of Contents
Advertisement
6.1.3
Configure the WLAN Interface
The WLAN settings operate using any standard 3G USB modem. For remote
locations, using a 3G modem allows you to access the AE-166/167 web
server or to control the AE-166/167 via remote control commands.
Background
►
To use the AE-166/167 as a server using a 3G modem, you must first
obtain a fixed IP address from a network provider. Each provider will assign
different fixed IP addresses.
WLAN configuration Settings
►
IP Address, Default Gateway, Subnet Mask, DNS Server
Connection
►
Connect the 3G USB modem to the front panel USB A port.
The 3G status icon
When it is first connected it will be grayed-out to indicate that it is connected
but not activated.
167
will appear when the 3G USB adapter is connected.
Figure 128.
February 2017
Advertisement
Table of Contents
