3.6.5
Using the Gated Sweep Mode
Connection
►
Connect a trigger signal (3.3v CMOS) to the GATE IN port on the rear panel.
NOTE:
Operation
►
Press
Press
Press
Gate Delay: 0 s ~ 1000 s
Gate Length: 58 us ~ 1000 s
Display Icon
►
The Sweep Gated icon is displayed when Gated Sweep is turned
on.
February 2017
Figure 42.
RBW must be equal to or greater than 10 kHz for the gated
sweep mode function to be available.
> GateDelay[F5] and set the gate delay time.
> Gated Length[F6] and set the gate time length.
> Gated Sweep[F4] and turn the mode on.
50