Example
►
Operation: Setting up the main channel
►
Press
Any other measurement mode will automatically be disabled.
The display splits into two screens. The top shows the trace with the start
and stop offsets. The bottom screen shows the phase jitter measurements.
Press Start Offset[F2] to set the start offset:
Offset: (0 Hz ~ ½ span freq)
Press Stop Offset[F3] to set the stop offset:
Offset: (0 Hz ~ ½ span freq)
February 2017
Figure 78.
> Phase Jitter[F4]>Phase Jitter[F1] and turn Phase Jitter on.
Figure 79.
104