3.9.1
Activate a Normal Marker
Operation
►
Press
Marker: 1 ~ 6
Press [F2] to turn the selected marker on.
Press Normal[F3] to set the selected marker to the Normal type.
The display will show the marker on the trace (centered by default) with
the marker measurement at the top of the display.
3.9.2
Move Marker Manually
Operation
►
Press
number.
Use the left/right arrow keys to move the marker one
grid division.
Use the scroll wheel to move the marker in fine
increments.
Alternatively, the numeric keypad in combination with the
F1 ~ F7 keys can be used to directly enter the frequency
of the marker position
65
> Select Marker[F1] and select a marker number.
Figure 48.
> Select Marker[F1] and select a marker
February 2017