3.6
Sweep
The AE-166/167 has a number of sweep options including setting the sweep
time, the sweep run mode (continuous, single) and sweep mode (fast, slow).
The AE-166/167 also has gated sweep modes.
3.6.1
Sweep Time
Description
►
Sweep time defines the length of time the system takes to "sweep" the
current frequency span. Note, however, that sweep time and RBW/VBW are in
a trade-off. Faster sweep times update the display more frequently but make
RBW and VBW wider, reducing the capability to separate signals at close
frequencies.
Operation
►
Press
Man.
Set the sweep time for the Man mode.
Mode: Auto, Man
Range: 1.14 ms ~ 1000 s (span = 100 Hz, RBW = 3 kHz)
Resolution: 46.6 us ~ 1000 s (span = 0 Hz, RBW = 1 MHz)
Display Icon
►
The SWT icon will be displayed at the bottom of the screen when
the sweep is in manual mode.
47
> Sweep Time[F1] and toggle the Sweep time to Auto or
February 2017