Promax AE-166 User Manual page 20

Amplitude Offset
Battery indicator
Bandwidth Indicator
Average
External Lock
External Trigger
Math
Sequence Indicator
Sweep Indicator
Tracking generator
TG Normalization
Wake-up clock
USB
Micro SD
11
Indicates that the amplitude-shift is
active. This icon
amplitude-related functions are used:
Reference level offset
Amplitude Correction
Input Z = 75 Ω and Input Z cal > 0
Indicates the battery charge.
Indicates that the
settings are in manual mode.
Indicates that the Average function is
active.
Indicates that the system is now
locked and refers to the external
reference input signal.
External trigger signal is being used.
Trace math is being used.
Shown when a sequence is running.
Indicates that the sweep time is
manually set.
Indicates that the tracking generator
is turned on.
Indicates that the tracking generator
has been normalized.
Indicates that the wake-up clock is
turned on.
Indicates that a USB flash drive is
inserted into the front panel and is
recognized.
Indicates that a micro SD card is
inserted into the front panel and is
recognized.
appears when
RBW or VBW
February 2017