5.1.10
Quick Save
Description
►
The
The type of file that is saved is pre-configured with the
By default, the
an external flash drive (if inserted).
Supported File Types
►
Screen, trace, state, limit line, correction, sequence, power meter*.
Connect External Memory
►
To save files to a USB flash drive or micro SD card, insert the appropriate
device into the front panel ports.
Quick Save Setup
►
Press the
Using the Quick Save key
►
Press
above.
A "Save Finish!!" message will be shown at the bottom of the screen
when the save has been completed.
NOTE:
NOTE:
*power meter accessory must first be installed before it can be saved.
February 2017
key is a hot key to save files with a single press.
the key will save screen shots to the local memory or to
key and configure the file Type, Data Source and Format.
at any time to save the selected file type using the settings
The file name will be automatically created in the following
format for data files:
File name: Type_data source_XX.file extension
The image file names will be automatically created in the
following format:
File name: QuickJpg_XX.jpg
The XX parameter is incremented each time the same file
type is created.
The USB and micro SD card options will only be available
when a flash drive/SD card is inserted into the front panel
ports.
key.
164