Promax AE-166 User Manual page 115


Select Offset: Selects the offset pairs (1 ~ 5) used for configuration.

Start Freq: Sets the start frequency offset for the selected offset number.

Stop Freq: Sets the stop frequency offset for the selected offset number.

RBW: Sets the resolution bandwidth of the selected offset number.

Abs Start: Sets the absolute level limit at the Start Freq for selected offset
number.

Abs Stop: Sets the absolute level limit at the Stop Freq for the selected
offset number. The Abs Stop level limit can be set to Couple or Man. Man
allows Abs Stop to be user-defined, while Couple will lock Abs Stop to the
Abs Start level limit.

Rel Start: Sets the relative level limit at the Start Freq for the selected
offset number.

Rel Stop: Sets the relative level limit at the Stop Freq for the selected
offset number. Rel Stop can be set to Couple or Man. Man allows Rel Stop
to be user-defined, while Couple will lock Rel Stop to the Rel Start level
limit.

Fail Mask: Sets the fail conditions for measurement with regards to the
level limits: Absolute, Relative, Absolute & Relative, Absolute or Relative.
Measurement items
►

Main Channel Bandwidth: Unit: Hz

Total Power: Unit: dBm

PSD (Power Spectral Density): Unit: dBm/Hz

Offset 1 ~ 5: Lower dBm, Upper dBm
February 2017
106