Am Pass Fail Testing - Promax AE-166 User Manual

4.1.5

AM Pass Fail Testing

Description
►
The Limit Edit function puts a pass limit on the AM depth, carrier offset and
carrier power.
Measurement Range
►
AM Depth: 5 % ~ 95 %
Carr. Offset: 1 Hz ~ 400 kHz
Carrier Power: -120 dBm ~ 30 dBm
Operation: configuration
►
Press
limits.

AM Depth[F1]: If the measured depth is above this limit, it will be
judged as Fail.

Carr. Offset[F2]: If the measured carrier offset is above this limit, it
will be judged as Fail.

Carr. Power[F3]: If the measured carrier power is above this limit, it
will be judged as Fail.
Press Pass/Fail Test and turn Pass/Fail on.
The AM Measurement area in the bottom half of the screen will now
include Pass/Fail indicators for the AM depth, carrier offset and carrier
power.
Example
►
February 2017
> Demod[F2] > AM Analysis[F1] > Limit Edit[F5] and set the
Pass:
Figure 75.
Fail:
98