3.5.5
Average Type
Description
►
The Average Type function determines how the AE-166/167 determines
the average value.
LOG Average: Averages the trace points on a logarithmic scale.
Volt Average: Averages the amplitudes of the trace points on a linear
voltage scale.
Power Average: Averages the trace points on a logarithmic scale in
watts.
Operation
►
Press
Range: LOG Power, Volt Average, Power Average
Default: LOG Power
3.5.6
EMI Filter
Description
►
The built-in EMI filter is used for specific measurement situations such as EMI
average detection, where a higher level of sensitivity is required compared to
the standard configuration. When turned on, the RBW is set to -6 dB,
indicated by an asterisk (*).
When any measurement functions are turned on, the EMI filter is
automatically disabled. Conversely if the EMI filter is turned on, any
measurement functions are turned off.
Operation
►
Press
February 2017
> Average Type[F5] and choose the average type.
> EMI Filter[F6] and toggle EMI filter on or off.
46