Move Channels Up/Down
►
Press
another channel:
Channel Move Up[F5]: Next main channel.
Channel Move Down[F6] Previous main channel.
NOTE:
Remove Definitions Help
►
Press
Definitions Help on or off.
4.1.3
OCBW
Description
►
Occupied bandwidth measurements are used to measure the power of the
occupied channel as a percentage to the power of the channel.
Example
►
93
> Channel Analysis[F1] and press the following to move to
The channel space (CH SPC) parameter determines where
the next main channel is located.
> Channel Analysis[F1]>ACPR Setup[F1]>Def. Help to toggle the
Figure 72.
February 2017