Promax AE-166 User Manual page 126

Press Offset/Limit[F3] to set the offset parameters:

SelectOffset[F1]: Select which offset to edit.

[F2]: Toggles the selected offset on/off.

StartFreq[F3]: Sets the start frequency of the selected offset.

StopFreq[F4]: Sets the Stop Frequency of the selected offset.

RBW[F5]: Sets the RBW of the selected offset.
Press More 1/2[F6] to set absolute and relative level limits and
conditions:

Abs Start[F2]: Sets the absolute start level limit for the selected
offset.

Abs Stop[F3]: Sets the absolute stop level limit for the selected offset

Man: Allows a user-defined Abs Stop level

Couple: Sets the Abs Stop level to the Abs Start level.

Rel Start[F4]: Sets the relative start level limit for the selected offset.

Rel Stop[F5]: Sets the relative stop level for the selected offset.

Man: Allows a user-defined Abs Stop level.

Couple: Sets the Rel Stop level to the Rel Start level.
Press Fail Mask[F6] to set the Fail Mask conditions:

Absolute[F1]: Sets the fail condition to the Absolute level limit.

Relative[F2]: Sets the fail condition to the relative level limit.

Abs AND Rel[F3]: Sets the fail condition as both the absolute and
relative level limits.

Abs OR Rel[F4]: Sets the fail condition to either the absolute or
relative level limits.
Press Select Offset[F1] and repeat the above steps for any other offsets.

Offset: 1 ~ 5
117
February 2017