Irmc Microsd Card; Note For Embedded Lifecycle Management (Elcm) - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

Concluding steps
▶ Install all riser modules, see
▶ Install all fan modules, see
▶ Install the air duct, see
▶ Install the system board, see
▶
"Reassembling" on page
▶ Install all PSUs, see
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
15.5

iRMC microSD card

15.5.1

Note for embedded Lifecycle Management (eLCM)

The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key from user purchase order and activated through the iRMC
web interface.
For more information, see the "ServerView embedded Lifecycle
Management (eLCM)" user guide.
RX1330 M5
"Installing a riser module" on page
"Installing the new fan module" on page
"Installing the air duct" on page
"Installing the new system board" on page
53.
"Installing a hot-plug PSU" on page
57.
60.
Upgrade and Maintenance Manual
System board and components
66.
102.
61.
86.
64.
176.
333.
305