Irmc Microsd Card; Note For Embedded Lifecycle Management (Elcm); Installing The Irmc Microsd Card - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Concluding steps
▶ If applicable, install the expansion cards, see
on page 299.
▶ If applicable, install the SAS expander board, see
expander board" on page
▶ Install the system fan module, see
page 85.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
14.5

iRMC microSD card

14.5.1

Note for embedded Lifecycle Management (eLCM)

The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web interface.
For more information, see the "ServerView embedded Lifecycle
Management (eLCM)" user guide.
14.5.2

Installing the iRMC microSD card

Upgrade and Repair Unit
(URU)
TX1330 M4
268.
"Installing the system fan module" on
66.
79.
81.
Upgrade and Maintenance Manual
System board and components
"Installing an expansion card"
"Installing the SAS
121.
Hardware: 5 minutes
427