Upgrading With Non-Hot-Plug Hdds/Ssds; Preliminary Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.6.2

Upgrading with non-hot-plug HDDs/SSDs

Customer Replaceable Unit
(CRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.6.2.1

Preliminary steps

"Suspending BitLocker functionality" on page 111
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
7.6.2.2 Upgrading with non-hot-plug HDDs/SSDs
Ê Install the non-hot-plug HDD/SSD 1 as described in section
hot-plug HDD/SSD" on page
Ê If applicable, install the non-hot-plug HDD/SSD 2 as described in section
"Installing a non-hot-plug HDD/SSD" on page
Ê Install the non-hot-plug cage as described in section
plug cage" on page
270
267.
267.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Installing a non-
267.
"Installing the non-hot-
TX2560 M2 / RX2560 M2