Ink Status Menu; Roll Length Menu - MUTOH ValueJet VJ-1204 User Manual

4.8.14

Ink Status menu

Display information (ink status) of ink cassette that installed into the ink cassette slot.
Notes
•
When displaying the Ink Status menu, use the genuine ink cassette. When using ink cassette other
than the genuine ones, the ink status will not be displayed correctly.
Setup Item
KCMY 0 - 100 (Unit: %)
—
4.8.15

Roll Length menu

Set up the roll media length.
Setup Item
Roll media <Off>
Roll1
Roll2
Roll3
—
Roll Length menu
Set up the roll media length.
Setup Item Setting Value
Length 1m to <30m> to 99m
—
Setting Value
Residual ink quantity of K, C, M and Y colour is displayed.
•
[Cancel] key: Shift to the previous hierarchy.
► Setup menu
Setting Value
Roll Length is not used.
Set up the roll media length.
The Roll Length setting can be set for "Roll1" to "Roll3".
•
Set the roll media length.
•
When replacing the roll media, adjust the roll media length
again.
•
If the roll media length is not set, the residual quantity of
roll media will not be displayed correctly.
•
•
Description
Description
•
[Enter] key: Save the setting and shift to the previous
hierarchy.
•
[Enter] key: Save the setting and shift to the next
hierarchy.
► Roll length menu
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
► Setup menu
Description
Notes
[Enter] key: Save the setting value and shift to the
previous hierarchy.
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
► Setup menu
87
User's Guide ValueJet 1204
Chapter 4: Handling the printer
AP-75740 – Rev 1.1 – 23/01/2007