VJ-1624 OPERATION MANUAL
5.1.16 Ink Status menu
Displays the various information of smart chips.
NOTE
• To display the various information of Smart chips, use genuine ink and S/C cards.
If ink cartridges other than genuine ink cartridges are used, ink status will not be displayed
correctly.
Setup item
KCMY
5.1.17 Roll Length menu
Sets up the roll media length.
Setup item
Roll media
5.1.17.1 Roll Length menu
Sets up the roll media length.
NOTE
• After replacing the roll media, set the roll media length again.
If the roll media length is not set, the residual quantity of roll media may not be displayed correctly.
Setting
0 to 100 (unit: %)
—
Setting
<Off>
Roll1
Roll2
Roll3
—
Description
The amount of ink remaining in each ink cartridge of K/C/M/
Y is displayed.
• [Cancel] key: shifts to the previous menu.
5.1 Setup menu
Description
Roll Length is not used.
• [Enter] key: saves the setting and shifts to the previous
menu.
5.1 Setup menu
Sets up the roll media length.
The set values of the roll media length can be set as "Roll1" to
"Roll3".
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.17.1 Roll Length menu
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
5-29
5 Panel setup menu