Table of Contents
Advertisement
6 Turning the power ON/OFF
This section explains how to turn ON/OFF the printer.
6.1 Turning the power ON
Follow the procedure below to turn ON the printer.
1. Press the [Power] key on the operation panel to
turn ON the printer.
The Power lamp on the operation panel lights up in
blue.
The printer starts initial operation.
When the initial operation is complete, the printer
enters normal status.
6.2 Turning the power OFF
Follow the procedure below to turn OFF the printer.
1. Regarding the operating condition of the printer,
confirm the following.
Printing or other operations are not in progress.
The operation panel is in normal status.
2. Press the [Power] key on the operation panel to
turn OFF the printer.
The Power lamp on the operation panel turns OFF.
NOTE
If the operation panel is in the following status, the
power is ON.
The [Power] key is pressed in.
The Power lamp lights up in Blue.
Press the key once again and turn OFF the power.
The printer starts operating to turn the power OFF.
The operation panel displays "Power Off".
All the lamps on the operation panel and the LCD
monitor are turned OFF.
The printer automatically turns the power OFF.
7
Product activation
This printer requires activation when the power is
turned ON for the first time.
When "Activation required" is displayed on the
Operation panel, refer to "Product Activation Guide"*
to perform activation.
*Please download the "Product Activation Guide"
from the ValueJet Club below.
https://valuejetclub.mutoh.co.jp/mutoh/guser/
8 Setting the display language
and unit
Once activation has been completed, the printer
requires setting of the language, temperature unit, and
length unit at the time of restart.
Follow the procedure below to setup.
1. Once activation has been completed, "Reboot a
printer" is displayed on the Operation panel. Press
the [Power] key on the Operation panel and turn
the power OFF.
2. Press the [Power] key on the Operation panel and
turn the power ON.
"Language: English" is displayed on the Operation
panel.
3. Press [+] or [-] key on the Operation panel to
select the set value, and press the [Enter] key.
"Language: English" is displayed on the Operation
panel.
"Temp: Celsius[°C]" is displayed on the Operation
panel.
5
VJ-2638X/1938X/1638X/1938WX/1638WX INSTALLATION MANUAL
4. Press [+] or [-] key on the Operation panel to
select the set value, and press the [Enter] key.
If you want to display the temperature in Fahrenheit,
select "Temp: Fahrenheit [°F]".
5. Press [+] or [-] key on the Operation panel to
select the set value, and press the [Enter] key.
If you want to display the temperature in inch,
select "Length: inch".
This completes the setting the display language
and units.
The printer starts initial operation.
When the initial operation is complete, the printer
enters normal status.
VJx638xE-I-05
Advertisement
Table of Contents
