Turning The Power On; Product Activation; Turning The Power Off - MUTOH VJ-2638 Installation Manual

VJ-2638/1638/1638W Installation Manual
6.

Turning the power ON/

OFF
This section explains how to turn ON/OFF the
printer.
6.1 Turning the power ON
Follow the procedure below to turn ON the
printer.
11 Press the [Power] key on the operation
panel to turn ON the printer.
• The Power lamp on the operation panel lights
up in blue.
• The printer starts initial operation.
• When the initial operation is complete, the
printer enters normal status.
6.2

Turning the power OFF

Follow the procedure below to turn OFF the
printer.
11 Regarding the operating condition of the
printer, confirm the following.
• Printing or other operations are not in
progress.
• The operation panel is in normal status.
• The Low lamp on the operation panel lights
up in green. (VJ-1638/1638W)
• The High lamp on the operation panel is
turned off. ( VJ-1638/1638W)
VJ1638xE-I-03
11 Press the [Power] key on the operation
panel to turn OFF the printer.
• The Power lamp on the operation panel turns
OFF.
● If the operation panel is in the following
status, the power is ON.
The [Power] key is pressed in.
•
The Power lamp lights up in Blue.
•
Press the key once again and turn OFF
the power.
• The printer starts operating to turn the power
OFF.
• The operation panel displays "Power Off".
● If the head height is set to High or Mid,
"Change Head Gap Low" is displayed on the
operation panel. (VJ-1638/1638W) Set the
head height to Low.
• All the lamps on the operation panel and the
LCDmonitor are turned OFF.
• The printer automatically turns the power
OFF.
6
7.

Product activation

This printer requires activation when the power
is turned ON for the first time.
When "Activation required" is displayed on the
Operation panel, refer to "Product Activation
Guide" (separate volume) to perform activation.
• " P r o d u c t A c t i v a t i o n G u i d e " c a n b e
downloaded from the following URL of
Valujet Club
https://mbss.mutoh.co.jp/mutoh/guser/