Otto Bock SensorHand Series Instructions For Use Manual page 26

Program 2: 2 Electrodes AutoControl – LowInput (red Coding Plug)
OPEN
Myo-signal to the Myo-signal to the
electrode elec trode digitally
(short signal at any
level)
Speed:
proportional Speed:
15 mm/s to constant
300 mm/s 300 mm/s
9.2.1 Control with 1 electrode and 1 switch
proportionally controlled by the opening electrode.
Open:
at highest speed by short activation of switch
Close:
Plug the red/white cable of the 13E99 Connecting Cable to closing side of the
Attention:
9E169 Coaxial Plug (Fig. 5: (1) Battery Connecting Cable, (2) Electrode, (3)
red/white wire of 13E99 Connecting Cable)
Program 2: Electrode and Switch AutoControl – LowInput (red coding plug)
OPEN
Myo-signal to the Signal to switch:
electrode: Hand closes
Hand opens
Speed: Speed: constant
proportional 300 mm/s
15 mm/s to 300
mm/s
9.2.2 Control with 1 Switch:
This program may only be used with any Ottobock MyoBock Switch.
at maximal speed; as long as the open-side of the switch is activated. The Hand
Open:
stays open.
at maximal speed by activating the close-side of the Switch.
Close:
Program 2: Switch AutoControl – LowInput (red Coding Plug)
OPEN
Hand opens as Signal to close-side
long as open- of switch: Hand
side of switch is closes
activated.
Speed: constant Speed: constant
300 mm/s 300 mm/s
26 | Ottobock
CLOSE Initial Grip
Strength
10 N
CLOSE Initial Grip
Strength
10 N
CLOSE Initial Grup
Strength
10 N
AutoGrasp Force
Increase
up to max. 100 N
Autorasp Force
Increase
up to max. 100 N
AutoGrasp Grip
Force Increase
up to max. 100 N
FlexiGrip Function
effective at maximal
grip force
FlexiGrip Function
effective at maximal
grip force
FlexiGrip Function
effective at maximal
grip force
SensorHand Speed