Communications Module Settings (Startup Settings) - Omron SYSMAC FH Series User Manual

2-6-3

Communications Module Settings (Startup Settings)

The communication method used for communication with the Sensor Controller is selected from the
communication modules.
1
On the Main window, click Tool - System Settings to open the system settings.
2
On the Multiview Explorer on the left, select System settings - Startup - Startup setting and
then click the Communication tab.
3
Select one of the following Communication Modules based on the communication method used
to connect with the Sensor Controller and the Unit to be connected, and then click Apply.
Communications Module
Parallel
StandardParallel I/O
4
Click Data save in the Toolbar.
5
On the Main window, click Function - System restart.
6
Click OK in the System restart dialog box to restart the Sensor Controller.
When the Sensor Controller was restarted, the set Communication Module will operate with the
default settings.
Additional Information
You can save the Communication Module settings to a file.
Use the System data or System + Scene group 0 data option for saving settings to a file.
For details, Refer to Saving Settings Data to the Controller RAM Disk or an External Storage
Device in the Vision System FH/FHV Series User's Manual (Cat. No. Z365).
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)
2 Methods for Connecting and Communicating with External Devices
Select this Communication Module to perform Parallel interface.
Description
2
2 - 357