Omron SYSMAC FH Series User Manual page 200

2 Methods for Connecting and Communicating with External Devices
Areas
Address
Data Output Area
Areas
Address
Output Control
2 - 138
Setting item
[Factory default]
•
[Channel Area
(CIO)]
•
Work Area (WR)
•
Holding Bit Area
(HR)
•
Auxiliary Bit Area
(AR)
•
Data Memory Areas
(DM)
•
Extended Data
Memory Areas (EM)
(EM0 to EMC)
0 to 99999
[100]
•
[Channel Area
(CIO)]
•
Work Area (WR)
•
Holding Bit Area
(HR)
•
Auxiliary Bit Area
(AR)
•
Data Memory Areas
(DM)
•
Extended Data
Memory Areas (EM)
(EM0 to EMC)
0 to 99999
[200]
Setting item
[Factory default]
•
None
•
[Handshaking]
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)
Setting value
Set the Response Area.
The range of the available EM area varies
depending on the PLC types to be connect-
ed.
Set the first channel address of the Re-
sponse Area.
Set the Data Output Area.
The range of the available EM area varies
depending on the PLC types to be connect-
ed.
Set the first channel address of the Data
Output Area.
Setting value
Set whether to provide an interlock with the
PLC when the data is performed.
None: Data is output regardless of the status
for signals from he PLC. The GATE is always
OFF.
Handshaking: Data is output after the DSA
signal from the PLC was checked.
Description
Description