Setting Communications For Robot Controller - Omron FH Series Connection Manual

3.1. Setting Communications for Robot Controller

Please follow the procedures below to set the communications for the robot controller.
Set the Mode selector switch
on the teaching pendant to
[MANUAL].
Touch the [F6 Setting] button
on the basic screen of the
teaching pendant to display
the "Setting (main)" window.
1
Select [F5 Communication and
Token] - [F2 Network and
Permission] to display the
"Communication Settings"
window.
Select the device [Ethernet],
and set the IP address, Subnet
mask, and Gateway of the
robot controller.
With right-click, select
[Network and Sharing Center]
- [Change adapter settings]
from the control panel of the
PC and open the property for a
network adapter connecting
the robot controller.
2
17