Omron SYSMAC FH Series User Manual page 272

2 Methods for Connecting and Communicating with External Devices
l Settings the Sensor Controller (Device parameters Settings)
1
Right-click the Sensor Controller on the network in the Network Configurator and select
Parameter → Edit.
2
As the Edit Device Parameter dialog box will open, perform the settings as necessary.
Parameter
name
0001 Input
*1
Size
0002 Output
*2
Size
0003 RPI
*1. Although the data size can be set up to 502 bytes, use the above setting.
*2. Although the data size can be set up to 502 bytes, use the above setting.
*3. The packet interval (RPI) is set in the connection settings between the PLC and the Sensor Control-
ler. No additional setting is required here.
2 - 210
Description
The size will be the sum of the
size of the Response Area, Data
Output Area, and User Output
Area.
The size will be the sum of the
size of the Command Area and
the User Input Area.
*3
The required packet interval
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)
Setting value
Set one of the following values.
Result Data Format 0 is selected:
•
48 bytes (When the User Area is not used.)
•
80 bytes (When the User Area is used.)
Result Data Format 1 is selected:
•
80 bytes (When the User Area is not used.)
•
112 bytes (When the User Area is used.)
Result Data Format 2 is selected:
•
144 bytes (When the User Area is not used.)
•
176 bytes (When the User Area is used.)
Result Data Format 3 is selected:
•
272 bytes (When the User Area is not used.)
•
304 bytes (When the User Area is used.)
Set one of the following values.
•
20 bytes (When the User Area is not used.)
•
52 bytes (When the User Area is used.)
10,000