Omron SYSMAC FH Series User Manual page 83

Additional Information
Communications are set up as shown below when you use the Multi-line Random-trigger mode.
Settings on
the window
for line 0
Settings on
the window
for line 1
Settings on
the window
for line 7
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)
2 Methods for Connecting and Communicating with External Devices
Communications Communications
Module setting specifications settings
Set [Fieldbus] to [EtherCAT].
• The communications settings
(e.g., communications cycle):
Are the same for all lines.
• Number of output data bytes
(output size):
Set for each line.
Communications
Module setting
Set [Fieldbus] to [EtherCAT].
Communications
Module setting
Set [Fieldbus] to [EtherCAT].
Output data
designation
Output data
designation
The output data is designated
according to the output data
size that was set on the
window for line 0.
Output data
designation
The output data is designated
according to the output data
size that was set on the
window for line 0.
2
2 - 21