Omron SYSMAC FH Series User Manual page 441

Each time ON and OFF are switched, the changed contents are displayed on the monitors of
external devices. Make sure there are no problems.
Additional Information
For the FZ5-800/1100/1200 series, DO0 to DO7 of line 1 are assigned to the DO8 to DO15 par-
allel terminals. Therefore, if you turn ON DO0 to DO7 to test line 1 communications, signals will
be output on the DO8 to DO15 parallel terminals.
Precautions for Correct Use
For the FZ5, the status of the following signals can be checked only on the Communication
confirmation dialog box for line 0.
• RUN
• ERR
• BUSY
5
Click Close.
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)
2 Methods for Connecting and Communicating with External Devices
2
2 - 379