Omron SYSMAC FH Series User Manual page 510

For communication settings

Hide thumbs Also See for SYSMAC FH Series:

Table of Contents

FH-1000/2000/3000/5000 series Sensor Controller

Terminal type

FH-L/FHV series Sensor Controller

Terminal type

Precautions for Correct Use

• When the Multi-line Random-trigger mode is selected in the following series, usable signal

type or assignment are differ depending on the used number of Lines.

• FH-1000 series

• FH-2000 series

• FH-3000 series

• FH-5000 series

For more details of Operation mode, refer to Multi-line Random-trigger Mode Signal Specifi-

cations on page 2 - 386.

• The terminal status of each line can be got by sending this command to the port number allo-

cated to them. For signals that are common in all lines, the terminal status can be got from

any line used.

When the terminal status for an unusable line or a different line was got, the response code

will be OK and the response data will always be 0.

Check the status of the received data by changing the actual parallel terminal status.

FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)

Terminal number

Terminal number

Show Quick Links

Table of Contents

Troubleshooting