Checking The Ethernet/Ip Communications - Omron FH Series Connection Manual

7.5. Checking the EtherNet/IP Communications

Confirm that the EtherNet/IP tag data links are operated normally.
7.5.1. Checking the Connection Status
Check the connection status of EtherNet/IP.
1
Confirm that the EtherNet/IP tag
data links are operated normally by
checking the LED indicators of the
PLC (EtherNet/IP Unit).
The LED indicators in normal status
are as follows:
MS: Green lit
NS: Green lit
COMM: Yellow lit
100M or 10M: Yellow lit
2
Check the LED indicators on the FH
Sensor Controller.
The LED indicators in normal status
are as follows:
POWER: Green lit
Error: Not lit
NET RUN2: Green lit
LINK/ACT2: Orange flashing
(Flashing while packets are being
sent and received)
3
Confirm that the tag data links are
normally in operation by checking
the status information on the
Monitor Device Window of the
Network Configurator.
Right-click the device icon of node 1
on the Network Configuration Pane
and select Monitor.
7．EtherNet/IP Connection Procedure
42