Omron SYSMAC FH Series User Manual page 430

2 Methods for Connecting and Communicating with External Devices
Additional Information
Data is output in the order that Output Units are registered in the measurement flow, i.e., the
timing is different for each data output processing unit. (Data output is executed in the order
that it is executed in the measurement flow.)
l Set the items to output
In an expression, set the data to output (i.e., the measured value of a processing item or the calcu-
lation results of an expression).
Up to 8 expressions from 0 to 7 can be set in each unit.
1
Click the Parallel Data Output icon
2
In the Item tab area, click Setting.
3
In the list, click the output data number to set the expression.
The selected output data number is displayed under the list.
4
Click
Specify the processing items, measurement results, and measurement data in the expression.
Arithmetic or function calculations can be applied to the measurement data to output.
For details of the calculation settings, refer to Calculation in the Vision System FH/FHV Series
Processing Items Reference Manual (Cat. No. Z341).
5
Click
The entered comment will be displayed in the detailed results area on the Main window.
For example, Test was entered as the comment for the expression 0, Test will be displayed in-
stead of Expression 0 in the detailed results areas on the Main window.
6
Repeat step 3 to 5 to set expressions for all of the required output data numbers.
2 - 368
next to the expression text box and set the expression.
for the Comment text box and enter the description for the expression.
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)
.