Omron SYSMAC FH Series User Manual page 293

Signal
DATA0 to 7
User Output Area 0
to 5
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)
2 Methods for Connecting and Communicating with External Devices
Signal name
Outputs the data set in the output processing item.
Output data 0 to 7 When more than one processing item exists, data is overwritten
on this area by performing handshaking.
This area is used that the Sensor Controller writes the data that
User Output Area 0 you defined using Macro customize functions.
•
to 5
Function
Data type of the User Output Area 0 to 3 is DINT. Data type
of the User Output Area 4 to 5 is LREAL.
2
2 - 231