Omron SYSMAC FH Series User Manual page 42

1 Overview
● Parallel
The data is output to the PLC signal lines via DO signals (DO0 to DO15).
● Non-procedure Communications
The data is output to the PLC reception buffer through non-procedure (normal) communications.
Outputting the Measurement Data
The measurement data is output to the external device via the Communications Module by the proc-
essing unit for data output (hereafter, Output Unit) placed in the measurement flow.
Therefore, to output measurement data, you must place an Output Unit in the measurement flow in
advance.
The measurement data is output when the Output Unit is performed and not when the measurement
has been completed.
Measurement started.
Measurement executed.
Search measurement
results output.
You can output character strings read by processing items such as Character Inspection, Barcode, or
2D Code. (Available only for PLC Link and Non-procedure protocols)
Character strings are output simultaneously when the processing item is performed.
1 - 18
Processing
order
Measurement flow
0.Camera Image Input
1.Search
2.Data Output
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)
Sensor Controller
Single Measurement
command
Processing started
(BUSY).
Communications
Module
The results for
measurements for
1. Search are output.