Omron SYSMAC FH Series User Manual page 602

Appendices
MEASURE or M
Executing measurement
Executes measurement one time.
<Command format>
<Response format>
When processing is performed normally:
• Non-procedure
• Normal (Fxxx series)
When processing is not performed normally:
Additional Information
For Normal (Fxxx series method), refer to 2-5-9 Command Formats on page 2 - 343.
<Parameters explanation>
Measurement result
Starts continuous measurement
Starts continuous measurement.
<Command format>
<Response format>
When processing is performed normally:
A - 130
When "Data Output" is set in the flow, the measurement results are output.
When "Data Output" is not set, the measurement results are not output.
Refer to 2-5-11 Output Format on page 2 - 349.
FH/FHV Series Vision System User's manual for Communication Settings (Z342-E1)