Status Code Entry Chart - Xerox 3050 Service Manual

CAUSE
I
CLEARANCE PROCEDURE GO TO RAP
IN
I
A1.O1 Insert Document Sensor was actuated at
Refer to the display on the control panel and A1 .O1 Document Handler
Power On. follow the clearance procedure. RAP
A1.02 Front Document Sensor was actuated at Refer to the display on the control panel and A1.02 Document Handler
Power On. follow the clearance procedure. RAP
A1.03
Rear Document Sensor was actuated at Refer to the display on the control panel and A1 .03 Document Handler
Power On. follow the clearance procedure.
RAP
A1.25 Document did not reach the Rear Document Refer to the display on the control panel and A1.25 Document Handler
sensor. follow the clearance procedure. RAP
I
Document reached the Rear Document
I
Refer to the display on the control panel and
Document Handler
sensor too early. follow the clearance procedure.
I
-
-
-- -
p p p p
- -
A1.33 Front Document Sensor did not actuate
Refer to the display on the control panel and A1.43 Document Handler
during rescan of the document. Document follow the clearance procedure. RAP
was removed after copy scan, but before
rescan.
A1.36
Rear Document Sensor did not deactuate Refer to the display on the control panel and A1.46 Document Handler
when the document was
in
the scan or follow the clearance procedure. RAP
rescan mode.
A1.38
Operator did not press the Partial Copy Refer to the display on the control panel and Instruct the operator how to
button a second time in order to start or stop follow the clearance procedure. use the Partial Copy feature.
the copying of a partial copy.
A1.43
Front Document Sensor did not actuate Refer to the display on the control panel and A1.43 Document Handler
when the document exited out the front of follow the clearance procedure. RAP
the copier.
A1.46 Rear Document Sensor did not deactuate
Refer to the display on the control panel and
A1
.46 Document Handler
when the document exited the front or rear follow the clearance procedure. RAP
of the copier.
Note: For document scan problems that are not indicated by a status code proceed to
OF2
Document Does Not Scan
RAP
Status Code Entry Chart