Xerox 3050 Service Manual page 521

ADJ 8.1 Image Registration
Prerequisite
Purpose
I
Perform the following Check/ Adjustments in
The purpose i s to obtain the correct
the sequence a s listed:
registration of the image on the copy. The
a. Fuser Temperature (NVM) (AOJ 10.1)
correct registration is obtained by adjusting
the time
a t
which the Media Transport Drive
b. Copy
Size
Adjustment (ADJ 5.1).
Motor i s energized. The motor drives the
Registration Drive Rolls which drive the media
to the drum.
Figure
1 .
Fold the
Copy
'COPY OF TEST
PATTERN
Check
1. Make a copy of the test pattern 82E5980,
using bond media.
Q
STEP2 A: Folding the copy will allow
checking the RL line with the REG. REF.
RO
line in the middle
o f
the
copy
media.
2. (Figure 1): Fold the copy.
(Continued)
3/93
3050 4-123
ADJ 8.1