Xerox 3050 Service Manual page 498

Parts List on PL 10.2
NOTE: Some copiers are equipped with TWO
4C Drive Motors, Developer Drive Motor
rMOT2I), and Fuserl Drum Drive Motor (MOT
22).
Copiers equipped
with TWO AC
Drive Motors
are identified
as Without Tag I
MOD 28,
[W I 0 Tag I MOD 28).
Other copiers are equipped with ONE AC
Drive Motor, Main Drive Motor (MOTZI),
Copiers equipped with ONE AC Drive Motor
ere identified as With Tag I MOD 28, (W I Tag
1
MOD 28).
Use this procedure on copiers equipped with
TWO AC
Drive Motors, (W I
0 Tag I MOD 28).
On copiers equipped with ONE
AC
Drive
Motor, refer to the (REP 10.48 Fuser Drive
Pulley (WITagIMOD28) removal procedure.
5. (Figure 2): Remove the Fuser Drive Pulley.
Removal
1.
Warning: Disconnect the power cord.
2. Remove the Right
and
Left Side Doors
(REP 14.1).
3. Remove the Xerographic Module (REP
9.1).
Flgure 1. Remove the BraZket
REMOVE FUSER
DRIVE PULLEY
RETAINER
Flgure 2. Remove the Fuser Drive Pulley
REP 10.4A