Rep 6.3 Illumination Sensor - Xerox 3050 Service Manual

REP 6.3 Illumination Sensor
Parts List on PL 6.1
Removal
1. Warning: Disconnect
the power cord.
2. Rotate the Control Console and remove
the Document Handler.
I
3. (Figure 1): W/ TagIMOD 2: Remove the
Platen.
t
LIFT THE
Y E
REMOVE THE NUT
\
(2) ONE EACH END
REMOVE THE
PLATEN WHILE
DOING THE STEP C
Figure 1. Remove the Platen
1 - 1
(Continued)