Xerox 3050 Service Manual page 650

12. Separate the First Call Report 3050 card
from the lnstallation Quality Report
3050
card and insert the First Call Report 3050
card into the Machine Log Pouch.
13. Record the following on the copier
lnstallation Quality Report
3050
card:
Copy count reading
Copier serial number
lnstallation date
r Comments (as required)
14. Mail the copier lnstallation Quality
Report
3050
card.
Product Demonstration
To demonstrate the capabilities of the 3050,
refer to the User Guide. Perform the
following procedures to train an operator:
1. Getting To Know Your Copier
2. Control Console
3.
Loading the media
4. Making the copies in the multiple copy
and sets modes. When to use them.
5.
Making the copies using the roll media
supply.
6. Making the copies using the cut sheet
media
7.
Scale Adjust
8.
Partial Copy
9. Document lnputl Copy Contrast
10. The Copy Output Selections
1 1. Adding toner and how to clear the
J1
status code
12.
Cleaning the Platen and the Optical
System
13. Problem Solving Status Codes
14.
Clearing the Copier
Installation Checklist
Site Preparation
-
Supply Voltage Check
-
Space Requirements
lnstallation
-
Remove the packing material.
-
Remove the Xerographic Module
-
Remove the tie-wrap on the
Cleaning Blade Solenoid Weight.
-
Install the Photoreceptor Drum
-
Reinstall the Xerographic Module
Remove the Toner Cartridge.
-
Level
the
copier.
Add developer
Install the Toner Cartridge.
Clean the Platen
Install the Document Handler
RX
only: Adjust the
2201240
switch
Enable the correct language
Functional Check
Switch on the copier and allow the
copier to warm up.
Perform the Country Configuration
(ADJ
3.2)
Perform Copy Size Adjustment (ADJ
5.1)
Perform the Cleaner Blade Solenoid
adjustment (AD1 9.1)
Perform the Electrostatic Series (ADJ
9.2)
Make five copies.
Check the copy quality.
Check the operator adjustments
Product Demonstration Checklist
-
ONIOFF
switch, copy count meter, and
serial number plate
Control Console
-
Making the Copies
-
Scale Adjust
-
Partial Copy
Adding the toner
-
Cleaning the Optical System
Problem Solving Status Codes
-
Clearing the Copier
installation
6-48 3050