Rep; High Voltage Power Supply (Hvps) - Xerox 3050 Service Manual

REP 3 . 2
High Voltage Power
Replacement
Supply (HVPS)
Q
Step 3 Fin Removal: Ensure that the
screws are reinstalled for a proper
Parts List
on
PL
1.3
electrical ground.
Removal
Route ell High Voltage wires through the
1. Warning: Disconnect the power cord.
appropriate cable ties, making sure that
2. Remove the left side door (REP 14.1).
@
the HY wires are not stressedagalnst sharp
metal.
3.
(50
Hz only): Remove shield that covers
HPVS. 1. Perform the Electrostatic Series (ADJ 9.2).
4.
(Figure
1):
Remove the High Voltage
Power Supply (HVPS).
Figure 1. Remove the ~ i ~ h ? o l t a ~ e ~ o w e & q ~ ~ l ~ (HVPS)
i - 1
REP
3 . 2