Xerox 3050 Service Manual page 645

(Continued)
38.
(Figure 30): Install the Copy Catch Shields.
\ BRACKET' INSTALL THE COPY
CATCH SHIELD BEHIND
THE BRACKETS
B
TIGHTEN NUTS (4)
C
REPEAT STEPS A AND B
TO INSTALL THE COPY A
CATCH SHIELD ON THE
SECOND MEDIA DOOR
Figure 30. Install the Copy Catch Shields
.
@
STEP39E: Ensure that the doon are 39. (Figure 31): Check1 Adjust the Front
high enough to engage the latches Doors.
when closed.
i
THE GAP CHECKED IN THE
STEP A AND THE
ALIGNMENT IN THE STEP B
ARE SATISFACTORY
IF ADJUSTMENT I S
NECESSARY PROCEED
A
CHECK IF THE G
BETWEEN THE DOORS
CHECK THAT THE
IS UNIFORM
BOTTOM OF THE
DOORS ARE ALIGNED
TO THE STEP D
1
Figure 31. Check/ Adjust the Front Doors
(Continued)
10192
3050 6-43
Installation