Status Code Chart - Xerox XC811 Manual

Problem Solving

Status Code Chart

Status
Code
Ensure that there is paper in the selected paper tray.
Ensure that the Paper Tray is closed properly.
Paper may not have fed all the way into the copier. (Refer
to Loading Copy Paper and Flashing
Copy paper has misfed. (Refer to Clearing the Paper
Path.)
When the toner cartridge replacement indicator appears,
the toner cartridge will need to be replaced soon. Be sure
to keep a replacement cartridge.
Copies will gradually become lighter until the copier stops
and the indicator begins to flash. When this occurs the
toner cartridge must be replaced.
When the drum cartridge replacement indicator appears,
the drum cartridge will need to be replaced within a 1,000
more copies. Be sure to keep a replacement cartridge.
After a further 1,000 copies, the Ready indicator will go
out, the drum cartridge indicator will flash, and the copier
will stop operating until the drum cartridge is replaced.
CH Install toner cartridge.
A1 – A2 Remove misfed paper from the Set Document Feeder.
Refer to A1 – A2 Set Document Feeder Misfeed for
detailed instructions.
U2 Switch OFF the Main Power. Wait at least 5 seconds.
Then switch ON the Main Power. If the Status Code
L1 – L8
continues, call for service.
H2 – H4
40
Suggested Solution
P
.)