Xerox 3050 Service Manual page 472

(Continued)
7.
Using a vacuum cleaner, clean the entire
6. (Figure
3):
Remove the Pressure Equalizer
Tubes.
REMOVE THE
REMOVE THE
GRIP RING
devdoper module, magnetic roll, and
pressure equalizer tubes thoroughly.
Figure 3. Remove the Air Equalization Tubes
1 * 1
STEP8A: Ensure that the entire length
o f
the tube
o n the developer module is
clear of
any
developer.
B. (Figure 4): Using a vacuum cleaner, clean
the housing where the pressure equalizer
tubes attach.
u*
0
VACUUM THE THE TONER
A N D DEVELOPER FROM
THE TUBES (2 PLACES)
Figure 4. Vacuum the tubes on the
developer module
(Continued)
REP 9.7