Xerox 3050 Service Manual page 442

(Continued)
Q
The service
nlls
are
stored i n the Lefi
Side Door of
the
Copler,
9.
(Figure 5): Remove the service rails from
the storage area.
REMOVE WING
SERVICE RAILS
Figure 5.
Remove the Serulce Ralls
STEP 10 8 : The medle supply doon must
remain closed when the service rails are
in use. The tab on the bottom o f the
service rails is there to ensure that the
media supply doors remain closed.
10.
(Figure
6):
Install the Xerographic Module
Service Rails.
INSTALL THE NUT
ROTATE THE RAIL
1
Figure 6. Install the Service Ralls
REP 9.1 8